PEEL-AND-STICK SLAT WALLS
The designer slat wall. Done in an afternoon.
Flexible 3D slat rolls that stick straight onto your wall, island or headboard. Cut with a knife, bend around corners โ no drill, no carpenter.
Free tracked shipping ยท 30-day money-back guarantee
WATCH IT GO ON
Real walls. Real installs.
No drill, no glue, no carpenter โ just peel, press and trim.
ONE AFTERNOON
Same wall. Completely different room.
Slats add depth, shadow lines and warmth that paint alone can't. Drag the slider to see the difference.
- No drillpeel, press, done
- 1 knifethe only tool you need
- โ 2 hrsfor a typical TV wall
HOW IT WORKS
From plain wall to slat wall in 4 steps
No drill, no glue gun, no carpenter. If you can use a tape measure and a knife, you can do this.
-
1
Measure
Width and height of your wall โ type them into the rolls box to see how many rolls you need.
5 min -
2
Clean & mark
Wipe off dust and grease, then draw a vertical line with a level for your first strip.
10 min -
3
Peel & press
Peel the film back bit by bit and press the strip on from top to bottom along the line.
โ 5 min per strip -
4
Trim & enjoy
Cut the bottom edge and around sockets with a sharp utility knife. Step back.
15 min
BEFORE YOU ORDER
What is your wall made of?
The adhesive holds best on clean, smooth, solid surfaces. Pick your wall to see how to prepare it โ two minutes of prep is the difference between a wall that lasts and one that doesn't.
- Sticks straight away
- Sticks after a quick prep
- Needs priming or tape first
Great match
Painted drywall
The ideal surface. Wipe off dust with a dry cloth. Freshly painted? Let the paint cure for at least two weeks before you start, and test one small piece in a hidden spot.
Works with a quick prep
Orange peel
A light texture is fine. Press every strip down firmly with a dry cloth or a small roller, working from the middle outwards so the adhesive reaches the low points.
Prepare it first
Knockdown
The raised patches hold the panel away from the wall. Add strips of strong double-sided mounting tape about every 12 in (30 cm), or skim the wall smooth first.
Prepare it first
Wallpaper
The panel only holds as well as the wallpaper does. Remove loose or vinyl wallpaper first. On well-bonded paper, stick a test piece and check it after 24 hours.
Works with a quick prep
Plaster
Painted or sealed plaster works well. Raw plaster is dusty: brush it down, apply a primer and wait until it is completely dry.
Great match
Tiles
Smooth tiles are a great base. Remove grease with a little degreaser and dry thoroughly. Fill deep grout lines first so they don't show through.
Prepare it first
Concrete
Bare concrete is porous and dusty. Brush it clean and seal it with a primer before you start.
Great match
Wood & furniture
Painted, sealed or laminated wood โ kitchen islands, headboards, cabinet sides โ works well. Remove wax or polish and wipe clean.
WHY SLAT ROLLS
The wood-slat look, without the woodwork
Solid slat panels look great โ and need a saw, screws and a free weekend. Paint is easy but flat. Rolls sit in between.
| Feature | Woodrow rolls | Wood slat panels | Paint |
|---|---|---|---|
| 3D slat depth & shadow lines | Yes | Yes | No |
| No drilling, no screws | Yes | No | Yes |
| Cuts with a utility knife | Yes | No | โ |
| Bends around curved fronts | Yes | No | Yes |
| Typical project time | An afternoon | A weekend | A day + drying |
| Weight on the wall | Very light | Heavy | โ |
| Cost | $ | $$$ | $ |
Try it on your wall. Risk-free.
If Woodrow arrives damaged, or it simply isn't what you hoped for, write to us within 30 days of delivery and we'll make it right โ replacement or refund.
- Damaged in transit? Free replacement
- Answers from a real person, usually within a day
- Secure checkout with the payment you trust
Questions before you order
Still unsure? Write to us โ a real person answers, usually within a day.
How many rolls do I need?
Type your wall's height and width into the โHow many rolls do I need?โ box above Add to cart โ it counts the strips for you. Rule of thumb: every roll gives one floor-to-ceiling strip on walls up to 9 ft 10 in (300 cm) tall, two strips on walls up to 4 ft 11 in (150 cm) and three up to 3 ft 3 in (100 cm). Count the strips across your wall and that is your number of rolls.
How big is one roll?
One roll is 15.7 in wide and 9 ft 10 in long (40 ร 300 cm) and covers about 12.9 sq ft (1.2 mยฒ).
What is it made of?
Flexible foam with a 3D slat profile on the front and a self-adhesive backing under a protective film. It is light, bends around curves and cuts with a knife.
Will the joins between strips show?
Press each new strip tight against the previous one and keep the slats lined up. Because the pattern is made of vertical grooves, a straight join is hard to spot once the wall is finished.
My ceiling is taller than one roll. What now?
Then each strip is made from two pieces. Put the join at the same height on every strip so it reads as one clean line.
Can I use it in a kitchen or bathroom?
Kitchen islands, coffee corners and walls away from the stove are great places for it. Keep it away from direct heat and water โ not behind a cooktop, not inside a shower.
Can I take it off again?
The adhesive is made to stay. Removing panels later can pull off paint or wallpaper, so treat it as a lasting finish rather than a temporary one.
How long does shipping take?
Every order ships with tracking. Orders are packed within 1โ3 business days and usually arrive 5โ8 business days later. You get a tracking link by email as soon as your rolls leave the warehouse.
What if something goes wrong?
If your rolls arrive damaged, send us a photo within 30 days and we replace them free of charge. Unused rolls in their original packaging can be returned within 30 days of delivery.